Category Archives: Apple TC Repair Service


How to Fix Apple TV Error 3905?

How to Fix Apple TV Error 3905?

If you apple TV will not connect to Wi-Fi, and you have put in the passcode it displays connection error 3905, then don’t worry about it. It’s very simple to Fix Apple TV Error 3905, with the use of the simple procedure. You can take experts’ help anytime dial at Apple TV Repair Service. Therefore, Error 3905 Code can occur due to various reasons includes intermittent connection issue, Software update, and Wi-Fi router issue; maybe the router is not recognized or programs/films cut off when the network connection is lost, or network connection issue, and so on. Well, in this blog, I mentioned some of the best tricks to fix the issue, as that solution suggested by the experienced Apple tech support technicians. So, you just need to follow the below steps to fix this issue quickly to get rid of the situation.

Steps to Fix Apple TV Error 3905 Code:

Method 1: Verify Wi-Fi Network

Verify Wi-Fi Network

Many times the error occurs due to the inability to connect Apple TV to a Wi-Fi network. Then you should verify that all other device is connected to the Wi-Fi network properly and the Internet is working. Also, check your computer or IOS devices, means that they are also connected to the Wi-Fi network correctly. Or else, you should try to change the channel on your wireless router and remove any possible interference culprit, such as Cordless phones, Shelves, Chrome faceplates, Microwave ovens, and Metal dividers on the entertainment unit where the Apple TV is placed.

Once you have done, as all the possible interferences have been cleared, so then you should try to test your connection.

Method 2: Ensure the Wireless Security Settings on Router

Ensure the Wireless Security Settings on Router

When Apple TV won’t connect to Network and error 3902 occur, then you have to make sure that Wireless Security Settings on your Router is correct. You may need to enter a password to access your Wi-Fi network. Make sure that you enter the correct password is correct. Maybe the password is incorrect or it’s too long, that why you are facing an error. So, check twice the password.

Also, check if there are no other wireless devices connected to the router, otherwise, you may try changing its wireless security.

Method 3: Update Your Wireless Router’s Firmware

Update Your Wireless Router’s Firmware

You should need to update the firmware of your wireless router to the latest version available. You may refer to your wireless router’s documentation for further instructions. If you are using an AirPort Base Station, then get the easy instructions for update firmware by connecting Apple Customer Service team.

Method 4: Check Mac Address FilteringCheck MAC Address Filtering

If you use MAC filtering as a layer of security that you need to check that MAC address filtering is enabled. You will need to add the MAC address of your Apple TV to your router’s list, and then you will instantly get a connection. You can find the Apple TV’s MAC address by going to “Settings”, then “General” and then “About’ option.

Method 5: Restart Your Apple TV

Restart Your Apple TV

If the problem still persists, then you shut down everything and restart, and to reset Apple TV. Follow the steps to Restart Your Apple TV.

  • On your Apple TV, go to “Settings”.
  • Go to “General” tab, and then choose “Restart” option.
  • Once your Apple TV is back on, then you can check your Wi-Fi connection.
  • If the same problem persists, then you should proceed with the next solution.

Also, in this situation, you can directly contact with Apple Customer Care Service team, who works 24×7 to your online aid and instant responses.

Related Post:- How to Enable Two-Step Verification for Apple ID On Your Mac?

Method 6: Update the Apple TV’s Software 

Update the Apple TV’s Software

You should try to update the Apple TV’s Software, maybe your software outdated. You need to immediate software upgrade of your Apple TV.

  • First, connect your Apple TV to the wireless router via using an Ethernet cable.
  • On your Apple TV, you have to go to “Settings” section.
  • Go to “General” tab, and then choose “Restart” Update Software” option.
  • Now check if there is an available update, then choose “Update Now” button.,
  • Wait for some time until the update process is downloaded and applied.
  • Then disconnect the Apple TV from the wireless router’s Ethernet port, and then try connecting to the Wi-Fi network again.

I hope your issue is fixed.

After performing all the above solution, if the same problem persists, then connect with technicians to get online help.

Apple Technical Support Phone Number

Instantly Connect With Professionals, Dial Apple Customer Service Number +1-855-267-5995:-

Apple TV Repair Service is available 24×7/365 days to user’s assistance and helps to connect with the dedicated and experienced technicians. They are always ready to support & aid, as the proficient experts will give the best instruction & guidance to fix the Apple TV-related technical errors and issues. Hence, connect with Apple customer service team to get prompt help and finest solutions to Apple TV queries.

Apple TV Error 139 Netflix

How To Fix Apple TV Error 139 Netflix?

‘Error 139’ indicates that there may be some problem with Netflix itself or your internet connection. Luckily, you can Fix Apple TV Error 139 Netflix  by trying some troubleshooting measures. Use online Apple Mac Support for the handy remedy from well-trained staff.

Fix Apple TV Error 139 Netflix

Steps to Fix Apple TV Error 139 Netflix

There are multiple ways you should try out to get your hurdles eradicated from the root. Just stick your eyes on the below solutions and do any one of them on your own:

  1. Check Your Internet Connection First: Error 139 most likely is been faced because of a bad internet connection. Find out by opening some other website. If it does not load or takes a lot of time to load, then damn sure that you have a connection issue. Therefore, disconnect your Wi-Fi, wait till 30 seconds, and then reconnect it. After that you can frequently play the video on Netflix but in case the same error is still showing, then feel free to avail Apple Mac Customer Care Service at the comfort of your home.

Related Post:- How To Fix Apple TV HDCP Playback Error?

  1. Try A Different Network: The configuration settings on your network may cause the problem. Try to connect a different network by following the below steps:
  • Firstly go to “Settings” and the “Wi-Fi”
  • Now select a different Wi-Fi connection and connect with it by entering password
  • After connection, just go back to Netflix and run your video hassle-freely
  1. Reboot Your Device: Another simple way to eliminate this error is to reboot your device. For doing it, you need to simply turn-off your Apple device and wait for 30 seconds then turn it back on again.
  1. Troubleshoot Netflix Connection for Error 139:If you still see the error, it means that there is a problem connecting to Netflix. To troubleshoot your connection with Netflix, follow the below steps:
  • Firstly check if the date and time of your device is accurate
  • Go to “Settings> General> Date & Time” and then adjust time either manually or by choosing the time zone
  • Update to the latest version of Netflix

Apple Technical Support Phone Number

Dial Apple Mac Customer Care Number +1-855-267-5995 For handy Solution

What!! Are you serious? Am I heard right? Even after following all these above steps, you are still facing the same error. Are you feeling blue because of that? If exactly, then buzz at Apple TV Customer Support Number +1-855-267-5995 where your call will be immediately picked-up by technical staff and they will let you know the procedure of annihilating such an error.

Apple TV HDCP Playback Error

How To Fix Apple TV HDCP Playback Error?

“HDCP” stands for High-bandwidth Digital Content Protection and it is a system designed to protect digital content. So, if you see the issues like blank, flickering, static screen, or an HDCP alert, then immediately Fix Apple TV HDCP Playback Error. You may also take technical advice via Apple Mac Customer Support Service Team as skilled techies are working here 24 hours a day.

Fix Apple TV HDCP Playback Error

HDCP is built into several devices including streaming video hardware, cable boxes, satellite TV receivers and more. If HDCP is not built in your old HDTV, there is no probability of watching the HDCP compatible contents. Hence, when you plug in HDCP standard devices, you will see HDCP error or a complete blank screen on your TV. What have to do if everything is alright and still getting “HDCP error” on your Apple TV? Well, this issue could also be due to faulty in HDMI cable or receiver. Even your HDMI switch might be playing the spoil sport. You can avail Apple TV Customer Care Service to get exact solutions in free of cost.

Solutions and Steps to Fix Apple TV HDCP Playback Error:

Try out these below solutions to get rid of this problem!

Solution 1: Check HDMI Cable/Turn OFF or ON Apple TV and Receiver

To check out this one, follow the below steps:

  • First of all unplug HDMI cable and then plug it again
  • Turn off Apple TV and receiver
  • Now unplug Apple TV from power source, and then wait for a minute
  • After that plug it back into the power source and then turn on Apple TV as well as Receiver
  • The selected HDMI input that matches the HDMI port should surely be connected to your Apple TV
  • HDMI switch might be creating trouble. So, connect Apple TV directly to your TV
  • Even the cable might be at fault. So, try out different cable to see if it works
  • Now, open “Settings”
  • Then, go to “Audio” and “Video”
  • And then adjust the HDMI settings
Solution 2: Restore your Apple TV to its Factory Settings

To do so, follow the below steps:

  • Go to “Settings”, then “System” and then “Reset”
  • Now select the “Reset” option which allows you to reset your device fast even without internet connection
  • Now click on “Reset and Update”

Related Post:- How to Fix Apple TV Error -3905?

Solution 3: Restore Apple TV through iTunes

To do it, follow all the steps one by one:

  • Firstly, unplug the HDMI cable and power code from the Apple TV
  • Then, launch iTunes on your computer
  • After that, plug a USB-C cable on the back of the Apple TV
  • Now plug the other end of your USB-C into a USB port on your computer
  • Check-out the summary page in iTunes
  • Click “Restore Apple TV”
  • Now allow it to get restored successfully
  • Once the restoring of Apple TV has been finished, then you need to unplug USB-C and power code
  • Then, finally you have to reconnect the “HDMI cable” and “power code” to your Apple TV

Apple Mac Repair Service

Dial Apple Mac Customer Service Number +1-855-267-5995 to get handy remedy:

What to do if nothing works in annihilating your error? Where should go for the assistance? Don’t be disheartened! In case, you are still confronting the same error. We have well-trained as well as talented technicians work hard 24 hours at Mac Customer Support Service an get instant solution and Support to Fix Apple TV HDCP Playback Error. As they know Apple Mac users might face lots of technical glitches at any time whenever they access their device. So, come to us and get an instant remedy effortlessly.